Action Enhancement Trigger Kit for M&P M2.0

Description

Action Enhancement Trigger Kit for M&P M2.0

The Action Enhancement Trigger Kit is engineered to provide the M&P 2.0 pistol owner with a smooth, consistent 5.0 to 5.5 lbs. trigger pull with the advantages of shorter over-travel and shortened trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. When installed this drop-in trigger kit will: 

• Reduce trigger pull weight by approx. 1 lb. to 5.0-5.5 lbs. range
• Reduce pre-travel and over-travel by approx. 20%
• Deliver smooth uptake and reset with crisp trigger break
• Maintain factory safety values with center mounted pivoting safety
• Direct drop-in replacement parts, no fitting required

Notes

This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring. Modern sear housing blocks can be found on Brownells.com and other online firearms product retailers.

For Use In These Guns

For use in all M&P M2.0 pistols in 9mm, .40S&W, and .45ACP, including the Full Size, Standard, Compact, and Subcompact.

EXCEPT for the Shield and Shield M2.0.

Also for use in the original M&P 45.

Does Not Fit These Guns

Not certified for use in the 10mm models.

NOT for use in the original M&P in 9mm or .40S&W.

Not for use in the Shield or Shield M2.0

What's in the Box?

1 ea. Action Enhancement Trigger

1 ea. 2-Dot Fully Machined Sear

1 ea. Heavy Duty Sear Spring

1 ea. Duty/Carry Trigger Return Spring

1 ea. Ultimate Striker Block

1 ea. Striker Block Spring

1 ea. Apex Sight Tool

1 ea. Slave Pin